Dingo 950 Operation & Maintenance Manual
21
Maintenance
It is essential to maintain the engine as detailed in the engine manual. Service
recommendations will vary depending on your engine type, refer to your engine
manual for this information. Any information relating to the engine below is
intended as a guide only.
Refer to the Pre Start up section for maintenance that should be completed before
starting machine (each and every time).
Frequency Dingo Type Maintenance Required Ref for Info.
Check hydraulic oil level and check for
external leaks
Pg. 26 & 27 Every
25 Hours
All Dingo 950’s
Check bushes & replace if required. Pg. 23
First
50 hours
Dingo 950D
Kubota D722-E
Change Engine oil Engine Manual
& pg. 24
Check hydraulic oil level and check for
external leaks
Pg. 26 & 27
Check hydraulic hose connections and
tighten if required
Pg. 26 & 27
Check tyre pressure Pg. 13
Replace Air Cleaner Element (1) Engine Manual
& pg. 23
All Dingo 950’s
Check for fuel leaks ---
Check battery electrolyte fluid level
Clean spark plugs
Every
50 Hours
Dingo 950P
Robin EH65D
Clean air cleaner
Engine Manual
Change Engine Oil & Filter Engine Manual
Test all functions in operation. ---
Tighten wheel nuts ---
Check drive chain tension & if necessary
adjust
Pg. 27
Replace fuel filter
All Dingo 950’s
Replace Air Cleaner Element (1)
Engine Manual
Remove cooling shrouds and
clean cooling area’s (1)
Check oil cooler fins, clean as necessary.
Dingo 950P
Check – Clean Spark Plug(s) (1)
Engine Manual
Replace Air cleaner element (1)
Engine Manual
& pg. 23
Change fuel filter & Clean fuel filter bowl
Check fan belt tightness
Every
100 Hours
Dingo 950D
Kubota D722-E
Check battery electrolyte level
Engine Manual
To Next Page
Loading...
Need help?
General