Dingo 950 Operation & Maintenance Manual
30
Engine overheats. 1. Engine load is
excessive.
2. Oil level in crankcase
is low.
3. Cooling fins and air
passages under engine
blower housing are
plugged.
4. Water level is low
(diesel only)
1. Reduce ground speed.
2. Add oil to crankcase.
3. Remove obstruction
from cooling fins and
air passages.
4. Top up water.
Abnormal vibration. 1. Engine mounting bolts
are loose.
1. Tighten engine
mounting bolts.
Machine does not drive. 1. Flow divider valve
lever is in 9 o’clock
position.
2. Hydraulic fluid level
low.
3. Traction pump drive
coupler is loose or
broken.
4. Pump and/or wheel
motor is defective or
damaged.
5. Control valve is
defective or damaged.
6. Relief valve is
defective or damaged.
1. Move lever to the 12
o’clock position.
2. Add hydraulic fluid to
reservoir.
3. Contact Service
Dealer.
4. Contact Service
Dealer.
5. Contact Service
Dealer.
6. Contact Service
Dealer.
To Next Page
Loading...
Need help?
General