MCWN
10
Identification
USER_MAN_ENG_MCWN
Reference directives
The machine supplied by DINI ARGEO s.r.l. does not fall within one of the categories of machines listed in Annex
IV of the Directive; therefore, for the purposes of certifying conformity of the machinery with the provisions of this
Directive, DINI ARGEO s.r.l. shall apply the conformity assessment procedure with internal check on the manufacture
of the machinery, as set out in Annex VIII.
To certify the conformity of the machine with the provisions of the Directive, before placing it on the market DINI ARGEO
has carried out the risk assessment in order to verify compliance with the essential health and safety requirements of
the Directive as well as the tests and checks required by the applied reference standards.
The technical construction file has been prepared in compliance with the provisions of Annex VII of Directive
2006/42/EC and is available for inspection by supervisory authorities upon a reasoned request, as required by the
laws in force on the matter.
DINI ARGEO s.r.l. then places the machine on the market, along with:
• CE Marking
• EC Declaration of Conformity
• Instruction manual for use, installation and maintenance (Documentation drawn up according to section 1.7.4 of
Machinery Directive 2006/42/EC)
please note that the machine has been designed according to the following Directives:
• 2006/42/EC Machinery Directive
• 2014/30/EU Electromagnetic Compatibility Directive
And that the following harmonised standards have been applied:
• EN 61000-6-2 : 2005
• EN 61000-6-4 : 2007 + A1 : 2011
• EN 61326-1 : 2013
• EN 55011 : 2009 + A1 : 2010
• EN 61010-1 : 2010
• UNI EN 13155 / 2009
• UNI EN 13889
Documentation supplied
• EU Declaration of Conformity available on the diniargeo.com site in the documents area
• Testing certificate available on the diniargeo.com site in the documents area
• User manual available on the diniargeo.com site in the product DOWNLOAD area
• Safety and maintenance manual supplied with the suspended crane scale
To Next Page
Loading...
