MCWN
17
Description
USER_MAN_ENG_MCWN
DESCRIPTION
Intended use (correct)
The machine in question is intended for industrial use for:
• weighing objects.
Max capacity permitted:
MODELS RESPECTIVE CAPACITY
MCWN
Not approved: MCWNT1, MCWNT3, MCWNT6, MCWNT9 1500 kg, 3000 kg, 6000 kg, 9500 kg
Approved: MCWNT1M, MCWNT3M, MCWNT6M, MCWNT9M 1500 kg, 3000 kg, 6000 kg, 9000 kg
The machine has been designed to:
• meet the specific needs mentioned in the sales contract;
• be used according to the instructions and limits of use provided in this manual.
The machine has been designed and built to operate safely if:
• it is used within the limits stated on the contract and in this manual;
• the user manual procedures are followed;
• scheduled maintenance is carried out in the times and in the ways indicated;
• unscheduled maintenance is promptly carried out if required.
Reasonably foreseeable misuse
The reasonably foreseeable misuses, which are intended as strictly forbidden, are listed below:
• transporting people;
• transporting unstable loads or fluids;
• using the machine in poorly lit areas;
• using the machine to move the load;
• using the machine in order to obtain production values above the required limits;
• using the machine dierently than described in paragraph “Intended use (correct)”.
Any other use of the machine than intended must be previously authorised in writing by the Manufacturer. In the
absence of said written authorisation, the use is considered “improper”; therefore the Manufacturer declines any
responsibility in regards to damage caused to property or people and deems any type of warranty on the machine
as void.
IMPORTANT!
Improper use of the machine relieves the Manufacturer from any responsibility.
To Next Page
Loading...
Need help?
General
