TPW
18
Description
USER_MAN_ENG_TPW_v4
Obligations and prohibitions
Operator obligations
The operator must:
• Perform maintenance operations always with the machine switched o. Not lubricate moving parts.
• When the machine is running, not operate nearby while wearing chains, bracelets, ties or other clothing that may
get caught in the mechanisms.
• Operators with long hair must tie them up in order to prevent them from getting entangled.
• During operation, pay the utmost attention that no person is able to directly access moving parts.
• Use the protective devices made available by the employer in an appropriate manner.
• Immediately report any deficiencies of the safety devices to the employer, the manager or the person in charge.
Operator prohibitions
Specifically, operators must not:
• use the machine improperly, i.e. for uses other than those indicated in the paragraph “Intended use (correct)”;
• remove or modify safety or warning devices without authorisation;
• carry out operations or manoeuvres that are not within their competence or that may compromise their own
safety or that of other workers on their own initiative;
• wear bracelets, rings or chains that can dangle and be dragged by moving parts, creating a hazard for the
operator;
• replace or modify the speed of the components of the machine without being authorised by a manager;
• use the machine if it has not been installed according to the regulations in force;
• use the machine as a support point even if it is not running (under risk of falling and/or the risk of damaging the
machine itself);
• use the machine outside the environmental conditions permitted (consult the paragraph “Environmental
conditions permitted”).
WARNING!
DINI ARGEO is not liable for damage to things or people if it is ascertained that the machine has been
used in a non permitted environment.
To Next Page
Loading...
Need help?
General
