TPW
22
Description
USER_MAN_ENG_TPW_v4
Environmental conditions permitted
The environment in which the machine must be used is an internal environment protected from weathering such as
rain (except IP versions), hail, snow, fog, suspended dust, combustible dust and must not be classified and protected
from aggressive agents such as corrosive vapours or excessive heat sources.
The ground must have an adequate maximum permitted load (cement, asphalt) and an even surface.
The machine has been designed and built to operate safely in the following environmental conditions:
Room temperature
-10°C ~ + 40°C
Maximum relative humidity
85 % non-condensing
Room lighting
min. 50 lux - non-glare light
Support surface
perfectly flat concrete industrial floor
WARNING!
Environmental conditions other than those specified may cause serious damage to the machine and void
the warranty.
IMPORTANT!
The work surface must be sufficiently illuminated.
In the event of dark areas in the workplace, it will be the user's responsibility to provide suitable lighting
devices.
To Next Page
Loading...
Need help?
General
