P
Phillip EllisonAug 29, 2025
Why was the smart key not detected by Directed Automobile Accessories?
- BbowenbrandonAug 29, 2025
The smart key was not detected, which prevents the system from shutting down the vehicle.
To Next PageTo Next PageWhy was the smart key not detected by Directed Automobile Accessories?
The smart key was not detected, which prevents the system from shutting down the vehicle.
What to do if my Directed Directechs DB3 Automobile Accessories system says 'Initialization failed'?
Reset the Directed Automobile Accessories module and complete the programming again. If the issue persists, please contact Technical Support.
How to fix Directed Automobile Accessories when CAN bus incorrectly detected?
Verify the CAN1 and CAN2 connections. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
What to do if Directed Remote Starter bypass processing error?
The bypass calculation failed. Reset the module and try again. If the condition persists, please contact Technical Support.
What to do if Directed Door locks module has no power?
First, check the D2D harness connection and ensure there's 12 Volts between the red and black wires. If the voltage is correct, the Directed Door locks module itself might be defective.
What to do if Directed Directechs DB3 CAN bus is incorrectly detected?
Verify the CAN1 and CAN2 connections. Check the connections.
What to do if MUX is not detected in Directed Directechs DB3?
The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Check the connections.
What to do if ISO 2 is not detected in Directed Automobile Accessories?
The Orange/Black wire did not detect the expected signal. Check the connections.
What to do if ISO 1 is not detected in Directed Directechs DB3 Automobile Accessories?
The Yellow/Black wire did not detect the expected signal. Check the connections.
What to do if my Directed Automobile Accessories system shows 'ISO 1 not detected'?
The Yellow/Black wire did not detect the expected signal. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
General| Brand | Directed |
|---|---|
| Model | Directechs DB3 |
| Category | Automobile Accessories |
| Language | English |
Lists all functions compatible with the vehicle for installation.
Presents an alternative wiring diagram for the DB3 module installation.
Shows alternative locations of key components within the vehicle for installation.
Lists error codes indicated by LED flashes during module programming.
Addresses troubleshooting for OBDII features and external module sync issues.
Explains LED feedback for lock, unlock, trunk, and auxiliary commands received.
Lists LED indicators for various reasons of remote start unscheduled shutdown.
Explains LED indicators for Remote Start Ready (RSR) specific error conditions.
Describes methods to send commands like lock, unlock, and remote start.
Explains the "Get In and Go" feature for seamless takeover after remote start.
Explains the functionality and benefits of the SmartStart mobile application for vehicle control.
