To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do for a bypass processing error in Directed Directechs DB3 Automobile Accessories?
The bypass calculation failed. Reset the module and try again. If the condition persists, please contact Technical Support.
What to do if the CAN bus is incorrectly detected in Directed Directechs DB3?
Verify the CAN1 and CAN2 connections. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
What does it mean if the OBDII feature is not supported in Directed Directechs DB3?
The diagnostic data bus was not detected, therefore the SmartStart features will be limited.
Why is there a PTS shutdown error in my Directed Directechs DB3 Automobile Accessories?
The PTS output from the module was not activated due to safety protection.
Why Runsafe was not disabled in Directed Directechs DB3?
No UNLOCK command was received prior to opening the door, or the 45 second timer expired in takeover mode.
What does it mean if the brake was not detected in Directed Directechs DB3?
The brakes were not detected, which prevents the system from shutting down the vehicle.
How to fix Directed Automobile Accessories when CAN bus incorrectly detected?
Verify the CAN1 and CAN2 connections. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
Why is BCM programming failing on my Directed Directechs DB3?
The BCM might have failed to program. Check if the doors are unlocked. If they are locked, unlock them to solve the problem.
Why were transponder functions skipped on my Directed Automobile Accessories?
If compatible and RXT mode is not desired, or if convenience features are needed, reset and reprogram the module.
What does it mean if ISO 1 is not detected on Directed Automobile Accessories?
If ISO 1 is not detected on your Directed Automobile Accessories, it means the Yellow/Black wire didn't detect the expected signal. Check the connections, referring to the installation wiring diagrams.
General| Brand | Directed |
|---|---|
| Model | Directechs DB3 |
| Category | Automobile Accessories |
| Language | English |
Lists all functions compatible with the vehicle for installation.
Presents an alternative wiring diagram for the DB3 module installation.
Shows alternative locations of key components within the vehicle for installation.
Lists error codes indicated by LED flashes during module programming.
Addresses troubleshooting for OBDII features and external module sync issues.
Explains LED feedback for lock, unlock, trunk, and auxiliary commands received.
Lists LED indicators for various reasons of remote start unscheduled shutdown.
Explains LED indicators for Remote Start Ready (RSR) specific error conditions.
Describes methods to send commands like lock, unlock, and remote start.
Explains the "Get In and Go" feature for seamless takeover after remote start.
Explains the functionality and benefits of the SmartStart mobile application for vehicle control.
