C
christopherkimSep 12, 2025
Why was Runsafe not disabled on my Directed Directechs DB3?
- TTimothy SampsonSep 12, 2025
No UNLOCK command was received before opening the door, or the 45-second timer expired in takeover mode.
To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...Why was Runsafe not disabled on my Directed Directechs DB3?
No UNLOCK command was received before opening the door, or the 45-second timer expired in takeover mode.
Why is the brake not detected by my Directed Directechs DB3 Automobile Accessories?
The brakes were not detected, which prevents the system from shutting down the vehicle.
Why is the smart key not detected by my Directed Directechs DB3?
The smart key was not detected, which prevents the system from shutting down the vehicle.
Why is speed detected when trying to shut down Directed Directechs DB3?
The vehicle was detected as moving, which prevents the system from shutting it down.
What to do if J1850 is not detected on Directed Automobile Accessories?
If J1850 is not detected in your Directed Automobile Accessories, check the J1850 wire connection. Wake up the data bus by turning the ignition on and try again.
Why is BCM programming failing on my Directed Directechs DB3, and how do I fix it?
If programming the BCM fails with your Directed Automobile Accessories, check if the doors are unlocked. If they are locked, unlock them to solve the problem.
What to do if CAN bus is incorrectly detected on Directed Automobile Accessories?
If the CAN bus is being incorrectly detected on your Directed Automobile Accessories, verify the CAN1 and CAN2 connections. Check the connections.
How to skip programming on Directed Directechs DB3 Automobile Accessories?
If the BCM programming still fails after making sure doors are unlocked, press on the programming button 5 times to skip this step for your Directed Automobile Accessories.
Why am I getting a PTS shutdown error on my Directed Directechs DB3?
The PTS output from the module was not activated due to safety protection in your Directed Automobile Accessories.
What does feature error mean on Directed Directechs DB3 Automobile Accessories?
An RSR feature file mismatch was detected for your Directed Automobile Accessories. Please contact Technical Support.
General| Brand | Directed |
|---|---|
| Model | Directechs DB3 |
| Category | Automobile Accessories |
| Language | English |
Lists all functions compatible with the vehicle for installation.
Presents an alternative wiring diagram for the DB3 module installation.
Shows alternative locations of key components within the vehicle for installation.
Lists error codes indicated by LED flashes during module programming.
Addresses troubleshooting for OBDII features and external module sync issues.
Explains LED feedback for lock, unlock, trunk, and auxiliary commands received.
Lists LED indicators for various reasons of remote start unscheduled shutdown.
Explains LED indicators for Remote Start Ready (RSR) specific error conditions.
Describes methods to send commands like lock, unlock, and remote start.
Explains the "Get In and Go" feature for seamless takeover after remote start.
Explains the functionality and benefits of the SmartStart mobile application for vehicle control.
