M
michele10Sep 17, 2025
What to do if initialization failed on Directed Automobile Electronics?
- MMiss Melissa ReyesSep 18, 2025
If the initialization process fails, reset the module and try the programming procedure again.
To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if initialization failed on Directed Automobile Electronics?
If the initialization process fails, reset the module and try the programming procedure again.
What to do if Directed Remote Starter CAN bus incorrectly detected?
Verify the CAN1 and CAN2 connections. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
What to do if MUX is not detected in Directed Directechs DB3?
The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Check the connections.
What to do if Directed Automobile Electronics CAN bus incorrectly detected?
Verify the CAN1 and CAN2 connections.
What to do if ISO 1 is not detected in Directed Directechs DB3 Automobile Accessories?
The Yellow/Black wire did not detect the expected signal. Check the connections.
What does 'ISO 2 not detected' mean for Directed Automobile Accessories?
If the Directed Automobile Accessories system indicates 'ISO 2 not detected,' the Orange/Black wire did not detect the expected signal. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
Why Brake was not detected in Directed Directechs DB3 Automobile Accessories?
The brakes were not detected, which prevents the Directed Automobile Accessories system from shutting down the vehicle.
Why speed was detected on Directed Automobile Accessories?
If speed was detected by your Directed Automobile Accessories, it means the vehicle was detected as moving, which prevents the system from shutting it down.
Why is the brake not detected by my Directed Directechs DB3 Automobile Accessories?
The brakes were not detected, which prevents the system from shutting down the vehicle.
Why is CAN bus incorrectly detected in Directed Directechs DB3?
If the CAN bus is incorrectly detected by your Directed Automobile Accessories, verify the CAN1 and CAN2 connections. Refer to 'Installation (wiring diagrams & vehicle wiring reference charts)' to check the connections.
General| Brand | Directed |
|---|---|
| Model | Directechs DB3 |
| Category | Automobile Accessories |
| Language | English |
Lists all functions compatible with the vehicle for installation.
Presents an alternative wiring diagram for the DB3 module installation.
Shows alternative locations of key components within the vehicle for installation.
Lists error codes indicated by LED flashes during module programming.
Addresses troubleshooting for OBDII features and external module sync issues.
Explains LED feedback for lock, unlock, trunk, and auxiliary commands received.
Lists LED indicators for various reasons of remote start unscheduled shutdown.
Explains LED indicators for Remote Start Ready (RSR) specific error conditions.
Describes methods to send commands like lock, unlock, and remote start.
Explains the "Get In and Go" feature for seamless takeover after remote start.
Explains the functionality and benefits of the SmartStart mobile application for vehicle control.
