Dirt Devil fusion - 4 Unpacking and assembling; 4.1 Unpacking; 4.2 Mounting the round brooms

38
4 Unpacking and assembling
4 Unpacking and assembling
4.1 Unpacking
1. Unpack the appliance and all its accesso-
ries.
2. Check the contents for completeness and
possible damage (Fig. 1).
4.2 Mounting the round brooms
1. Ensure that the appliance is switched off
(On/Off switch in the "0" position).
2. Fit on the round brooms, one after the oth-
er, as shown (Fig. 6).
ATTENTION:
Keep the packaging for storing the appli-
ance, or for safe transport. Always transport
or ship the appliance in its original packag-
ing to avoid damage.
NOTE:
Contact your dealer if you have found dam-
age resulting from transport.
6
7
WARNING:
Danger of injury! Ensure that the appliance
is switched off (On/Off switch in the "0"
position), before you mount the round
brooms.
NOTE:
If you want to remove the round brooms,
proceed as follows:
1. Grasp the round broom as shown
(Fig. 7).
2. Pull it forcefully up and off (Fig. 7).
M611.book Seite 38 Donnerstag, 2. Juli 2015 8:54 08