47
9 After use
GB
4. Next, remove the dirt bin cover from the
dirt bin (Fig. 29).
5. Hold the dirt bin over a dustbin with the fil-
ter inserted.
6. Only separate the dirt bin from the filter
over a dustbin (Fig. 30).
7. Tap lightly to knock out both parts
(Fig. 30) and remove coarser debris with
your hand.
8. If dirt bin and filter can no longer be com-
pletely emptied/cleaned through this
measure, proceed as described under
ZChapter 9.3, ‘Cleaning dirt bin and filter’.
M611.book Seite 47 Donnerstag, 2. Juli 2015 8:54 08