18
8. OPTIONAL ACCESSORIES
The following optional accessories are available for the ELEMENT ESS battery
module.
Table 8-1, ELEMENT ESS Accessories
Accessory Part Number
LYNK II Communication Gateway 950-0025
ELEMENT ESS Terminal Connector Set 950-0054
9. INSTALLATION
The following instructions describe how to connect single or multiple battery
modules in parallel to the LYNK communication device.
Instructions on installing the battery module in an enclosure are not provided.
WARNING
ELECTRIC SHOCK AND FIRE HAZARD
• This equipment must only be installed as specified.
• Do not disassemble or modify the battery module.
• Do not touch exposed contents if the battery module case has been damaged.
• There are no user-serviceable parts inside.
Failure to follow these instructions may result in injury.
NOTICE
• Some chargers and inverters support temperature-compensated charging. Disable
temperature-compensated charging on the charger or inverter.
• Do not use or install a battery temperature sensor.
NOTE
It is the responsibility of the installer to ensure that all applicable installation
requirements and standards are met.
9.1 Tools
• Insulated tools sized to match nuts, bolts, and cables
• RMS type Voltmeter
• Personal protective equipment
To Next Page
Loading...