Dish Network 311 - Changing Program Languages; Changing Menu Languages

Page 48
Chapter 3
Using the System
CREATING OR CHANGING CHANNEL LOCKS
Note: You can lock any channel, including pay-per-view channels.
1. Press the MENU button.
2. Select the Locks option.
3. If the receiver is locked, enter the password using the
number pad buttons. The receiver displays stars (*) as you enter the
digits of the password. As soon as you enter the fourth digit of the
password, the receiver highlights the
OK option. Press the SELECT
button.
4. Select the
Channel Locks option.
5. Highlight the channel that you want to lock. If
necessary, press the UP or DOWN ARROW button
to see the desired channel. You can also enter each
channel number using the number pad buttons.
6. Press the SELECT button to lock or unlock the
highlighted channel. If the check box next to the
channel has a check mark, the channel is locked.
7. Select the
Save option to save the changes.
8. If the receiver is not already locked, you must lock it to put the locks
you just created into effect.
LOCKING THE RECEIVER
1. Press the MENU button.
2. Select the
Locks option.
3. Select the
Lock System option.
The receiver displays a message prompting you to enter a
password.
Note: If this option appears as Unlock System instead, the receiver is
already locked.
4. Enter and check a password, using the number pad buttons. The
receiver displays stars (*) as you enter the digits of the password.