Dish Network 311 - Resetting the Receiver to Factory Default Settings; Using Troubleshooting Tools

Page 50
Chapter 3
Using the System
UNLOCKING THE RECEIVER FRONT PANEL CONTROL BUTTONS
To unlock the receiver front panel buttons, you must use the remote control.
1. Press the MENU
button.
2. Select the
Locks option.
3. If the receiver is locked, enter the password using the
NUMBER PAD buttons. The receiver displays stars (*) as
you enter the digits of the password. As soon as you enter
the fourth digit of the password, the receiver highlights the
OK option. Press the SELECT button.
4. Select the
Front Panel Lock option.
5. Select the
Yes option.
LOCKING PAY-PER-VIEW PROGRAMS
This locks all pay-per-view channels.
You also can lock one or more pay-per-view channels by using channel
locks or rating locks.
1. Press the MENU
button.
2. Select the
Locks option.
If the receiver is locked, enter the password using the number
pad buttons. The receiver displays stars (*) as you enter the
digits of the password. As soon as you enter the fourth digit
of the password, the receiver highlights the
OK option. Press the
SELECT button.
3. Select the
Lock PPV option.
4. If the receiver is not locked, you must lock it to put the
lock you just created into effect.
Tip: If this option
appears as Unlock
PPV instead, pay-
per-view programs
are already locked.