1
Hopper 3 Receiver
Your new Hopper® 3 receiver is a Whole-Home HD DVR that offers full digital video
recording functionality, including pausing live TV, to every TV in your house that is
part of your Whole-Home DVR system. The Hopper 3 receiver is the hub for all things
entertainment. It is an HD DVR that provides the equivalent of 16 tuners, allowing you to
record multiple HD channels at once and at any time and play them back in any room in
your home. Using the PrimeTime Anytime® feature, you can record up to six HD channels
simultaneously (with your local ABC, CBS, FOX and NBC channels provided in HD,
which may not be available in all markets). It is one HD DVR that works independently
on as many as four different TVs at the same time, so everyone can be in different room
watching their favorite TV programming.
Joey® receivers (Joey®, SuperJoey®, Wireless Joey®, 4K Joey™) connect to other TVs
in your home and link to the Hopper 3 system, creating a Whole-Home DVR network. It
supports all of the features of the Hopper 3 (with the exception of Picture-In-Picture) and
offers an identical user interface as the Hopper 3. You can connect a Joey receiver to a
high-denitionorstandard-denitionTV.
The remote uses radio frequency (RF) signals to control the Hopper 3 receiver and IR
signals to control any other equipment you have programmed. RF signals travel relatively
long distances and can go through walls and other solid objects. IR signals, used in TV,
DVD, and AUX device modes, travel up to 40 feet in a straight line-of-sight and cannot go
through walls or other solid objects. Point the remote directly at the equipment you want to
control without any objects blocking the signal path.
Note: The term “Hopper” in this document represents both the original Hopper® receiver,
the Hopper® with Sling® receiver, and the Hopper® 3 receiver.
Hopper_3_UserGuide.indd 1 8/17/2015 1:05:30 PM
To Next Page
Loading...
Need help?
General
