Distinction PASRW030-BP2 - 4.6.2 Setting and cancellation of timing ON and OFF

14
4. USE AND OPERATION INSTRUCTION OF WIRE
CONTROLLER
4.6.2 Setting and cancellation of timing ON and OFF
Short press " "
to set hour digit
Flashing
Press " "or " "
to adjust hour
digit
Press " " to
save the settings
and skip to the
minute digit setting
Hour digit flashing
Short press " "
or " " to adjustt
minute digit
Minute digit flashing
Short press " "
to save the settings
Flashing
Flashing
Flashing
Short press " " to save
the settings and return to
the main interface
6.2.4 Cancelling the Timer ON/OFF function
Flashing
Short press " "
Flashing
(hour or minute digit)
Short press " "
to cancel the timer
settings
Flashing
Short press " " to save
the change and return to
the main interface
While enter into the "," ", " " or " " timer setting interface, set the Timer ON/OFF as below: "
1 OFF1 OFF
ON ON2 2
* Take ON1 for example:
1) Select " "," ", " " or " " timer setting interface refers to 6.2.1, cancel the Timer ON/OFF as below:
1 OFF1 OFF
ON ON2 2
* Take ON1 for example:
Note: Under the Timer ON/OFF setting interface, if the timing symbol and entire time digits flash at
the same time, click " " to return to the main interface;
OFF
ON
1
2
Displays the first-stage timing switch on
Displays Timer ON function on
Displays the second-stage timing switch on
Dsiplays Timer OFF function on
2) To cancel the first-stage timing switch: cancel both " " and " ";
To cancel the second-stage timing switch: cancel both
" " and " " ;
To cancel the two stage timing switch: cancel all " "," ", " " and " " .
1 OFF1
ON
OFF
ON2 2
1 OFF1 OFF
ON ON2 2