20
5. MAINTENANCE AND INSPECTION
Check the water supply device and the release often. You should avoid the condition of no
water or air entering into system, as this will unit’s performance and reliability.
You should clear the pool/spa regularly to avoid damage to the unit as a result of a
r.
The area around the unit should be dry, clean and well ventilated. Clean the side heating
exchanger regularly to maintain good heat exchange as conserve energy.
The operation pressure of the refrigerant system should only be serviced by a
technician.
Check the power supply and cable connection often. Should the unit begin to operate
abnormally
Discharge all water in the water pump and water system, so that freezing of the water
in the pump or water system does not occur. You should discharge the water at the bottom
of water pump if the unit will not be used for an extended period of time. You should check
the unit thoroughly and the system with water fully before using it for the time
after a prolonged period of no usage.
To Next Page
Loading...
