16
4. USE AND OPERATION INSTRUCTION OF WIRE
CONTROLLER
Notes:
1) When the mute icon « » is hilighted : the timing mute has been set, but it’s not under
mute status.
2) When the mute icon « ’sunder the mute status.
3) When the mute icon « » disappear : the timing mute is not set.
4.8 Keyboard lock
To avoid others’ misoperation, please lock the wire controller after completing the setting.
Notes :
1. Under the locked screen interface, only unlocking operation is available and the screen will
be lighten after other operations conducted.
2. Under the OFF interface, locking operation is available and the operation method is the
same as locking scren under the ON interface.
4.9 Fault interface
When the unit fails, the wire controller can display the corresponding code according to the fault
For example:
1. Single fault:
2. Two or more faults:
Remark: The wire controller can display the temperature unit as «°F» or «°C» according to the
unit model you bought.
Keep long press of « »
for 5s
Short press « » or « »
Short press « »
Fault code
Fault number display
Qty of fault
To Next Page
Loading...
