Operation Overview - 26 100sx Operator’s Manual
Planning
Planning
1. Gather information about jobsite. See page 28.
2. Inspect jobsite. See page 29.
3. Classify jobsite. See page 30.
4. Select plow blade for your installation. See page 51
5. Check supplies and prepare equipment. See page 32.
6. Haul equipment to jobsite. See page 39.
Plowing
1. Start unit. See page 34.
2. Position plow and controls. See page 45.
3. Attach product. See page 45.
4. Begin plowing. See page 46.
5. Complete the installation. See page 53.
6. Shut down plow. See page 35.
Leaving Jobsite
1. Rinse equipment. See page 54.
2. Stow tools. See page 54.
3. Haul equipment away from jobsite. See page 39.
To Next Page
Loading...
