Ditch Witch Cx Series User Manual

Drill - 62 Cx Series Operator’s Manual
Operate
• If drilling becomes obstructed, stop rotation immediately.
7. When drill bit enters target trench, stop rotation immediately.
Start Bore with Drill String Guide
If drill string needs guidance have Helper follow the instructions below to operate the drill string guide at
start of bore.
1. Stand on left side of approach trench.
2. Put drill string guide in correct position:
IMPORTANT: After initial bore is complete, backream to enlarge bore or install product.
• See “Backream” on page 65.
• See “Install Product” on page 66.
Rotating shaft. Crushing will cause death or serious
injury. Stay away.
To help avoid injury:
• Use only the approved Ditch Witch® drill string guide (p/n 118-079).
• Never straddle trench or drill string.
• Never enter trench.
• Keep hands and feet away from drill string and drilling attachment.
• Never use drill string guide during backreaming or when drill string is being pulled back.
• Only use drill string guide on left side of approach trench.

Ditch Witch Cx Series Specifications

General

Brand	Ditch Witch
Model	Cx Series
Category	Farm Equipment
Language	English