Cx Series Operator’s Manual Service - 97
Procedures
C16x
Check before startup. Change at 5 hours and
every 50 hours thereafter.
Check
1. Check level at dipstick (2).
2. Add GEO at fill (1) as needed to keep level at
highest line on dipstick.
Change
1. While oil is warm, remove drain plug (4) and
drain.
2. Install plug.
3. Replace filter (3) each time oil is changed.
4. Add GEO at fill (1) to keep level at highest line
on dipstick.
To Next Page
Loading...
