Service - 98 Cx Series Operator’s Manual
Procedures
C24x
Check before startup. Change at 20 hours and
every 100 hours thereafter.
Check
1. Check level at dipstick (1) before each use.
2. Add GEO at fill (2) as needed to keep level at
highest line on dipstick.
Change
1. While oil is warm, remove plug (4) and drain.
2. Install plug.
3. Replace filter (3) each time oil is changed.
4. Add GEO at fill to keep level at highest line on
dipstick.
4
3
To Next Page
Loading...
