Ditch Witch FX30 - Page 102

FX30/FXT30 Operator’s Manual Service - 101
10 Hour
Check Water Pump Oil Level
With frame level, check water pump oil at sight
glass (2) every 10 hours. Add NDO at fill (1) as
necessary to keep oil at halfway mark on sight
glass.
Check Water Pump Belt Tension
Check belt every 10 hours for correct tension,
damage or wear. Contact your equipment dealer
for adjustment or belt replacement.
To check:
1. Turn ignition to STOP and remove key.
2. Apply moderate thumb pressure to belt
between pulleys.
3. Belt is properly tensioned when deflection is
.125-.25” (3-6 mm).
1
2
j33om021h.epsj33om021h.eps
j33om023h.epsj33om023h.eps