Prepare - 56 JT520 Operator’s Manual
Check Supplies and Prepare Equipment
CMW
Check Supplies and Prepare Equipment
Check Supplies
• receiver/transmitter or tracker with spare batteries
• beacons with new and spare batteries
• two-way radios with new and spare batteries
• quick wrench (see page 107)
• transition sub
• anchoring equipment and accessories
• bits, screens, nozzles (see page 102)
• adapters, pipe, beacon housings
• marking flags or paint
• water and additional hoses
• fuel (Use low sulfur or ultra low sulfur fuel only.)
• drilling fluid additives (see page 94)
•spare fuses
•keys
• backreamers, swivels, pulling devices (see page 102)
• wash down hose and spray gun
•duct tape
• spray lubricant
• tool joint compound (see page 120)
• electrically insulating boots and gloves
• personal protective equipment, such as hard hat and safety glasses
• notepad and pencil
To Next Page
