Service - 74 XT1600 Operator’s Manual
Recommended Lubricants/Service Key
CMW
Recommended Lubricants/Service Key
Proper lubrication and maintenance protects Ditch Witch equipment from damage and failure. Service
intervals listed are for minimum requirements. In extreme conditions, service machine more frequently.
Use only recommended lubricants. Fill to capacities listed in “Fluid Capacities” on page 94.
For more information on engine lubrication and maintenance, see your Kubota
®
engine manual.
Item Description
DEO Diesel engine oil meeting or exceeding CH-4 per the API service classification or E5
per the European Automobile Manufacturer’s Association (ACEA) and SAE viscosity
recommended by engine manufacturer (SAE 10W30)
MPG Multipurpose grease meeting ASTM D217 and NLGI 5
SAE 85W-140 lubricating oil. Synthetic oil 75W-140 is recommended in operating
temperatures above 80° F (27°C).
THF Tractor hydraulic fluid, similar to Phillips 66 HG, Mobilfluid 423, Chevron Tractor
Hydraulic Fluid, Texaco TDH Oil, or equivalent
DEAC Diesel engine antifreeze/coolant meeting ASTM D5345 (prediluted) or D4985
(concentrate)
Check level of fluid or lubricant
Check condition
Filter
Change, replace, adjust, service or test
NOTICE:
• Use only genuine Ditch Witch parts, filters, approved lubricants, and approved coolants to maintain
warranty.
• Use the “Service Record” on page 101 to record all required service to your machine.
To Next Page
Loading...