XT1600 Operator’s Manual Specifications - 95
CMW
Specifications are called out according to SAE recommended practices. Specifications are general and
subject to change without notice. If exact measurements are required, equipment should be weighed and
measured. Due to selected options, delivered equipment may not necessarily match that shown.
Battery
SAE reserve capacity 80 min, SAE cold crank @ 0°F (-18°C) 800 amp, 12V electrical system
Vibration Levels
Under normal operation of the excavator or tool carrier of the XT1600, the vibration level to the arms does
not exceed 6.18 m/sec
2
. Under the same conditions, the vibration level to the body does not exceed 1.69
m/sec
2
.
Noise Levels (EC-compliant units only)
Exterior 103 dBA sound power per ISO 6365
Operator 89 dBA sound pressure per ISO 6394
To Next Page
Loading...