Specifications - 100 XT855 Operator’s Manual
CMW
Specifications are called out according to SAE recommended practices. Specifications are general and
subject to change without notice. If exact measurements are required, equipment should be weighed and
measured. Due to selected options, delivered equipment may not necessarily match that shown.
Battery
SAE reserve capacity 110 min, SAE cold crank @ 0°F (-18°C) 800 amp, 12V electrical system
Vibration Levels
Under normal operation of the excavator or tool carrier of the XT855, the vibration level to the arms is
6.4 m/sec
2
. Under the same conditions, the vibration level to the body does not exceed 2.5 m/sec
2
.
Operator seat complies with ISO 7096.
Noise Levels
Exterior sound power level is 104 dBA, per ISO6394.
Operator ear sound pressure level is 92 dBA, per ISO 6394.
To Next Page
Loading...
