30
IP2162EN
EN
Display Description
TN - Setting of intervention temperature for NIO anti-
freeze system. [°C]
Adjustment of the working temperature of the control pan-
el. The value does not refer to ambient temperature.
5
TB - Display of working temperature of control panel.
DO NOT USE
WO - Setting of pre-flashing time on opening. [s]
Adjustment of the lead time for the switch-on of the
flashing light, in relation to the start of the opening op-
eration from a voluntary command.
00 - Minimum
05 - Maximum
00
WC - Setting of pre-flashing time on closing. [s]
Adjustment of the lead time for the switch-on of the
flashing light, in relation to the start of the closing op-
eration from a voluntary command.
00 - Minimum
05 - Maximum
00
TS - Setting of renewal of automatic closing time af-
ter safety device release. [%]
00 - Minimum
99 - Maximum
99
VR - Setting of learning speed. [cm/s]
05
08
(Neos Super Fast)
i
N.B.: make adjustments gradually and only after performing at least three complete
operations to allow the control panel to be set correctly and detect any friction during
operations.
AP
To Next Page
Loading...