Ditec Entrematic CS12E - Basic Adjustment (BA)

16
IP2162EN
EN
• using keys ↑ and ↓ select the desired function
• press the ENTER key to confirm
7.6 Second level menu - BA (Basic Adjustment)
Display Description
MT - Display of type of automation.
N3 - Motor with 300 kg capacity
N4 - Motor with 400 kg capacity
N6 - Motor with 600 kg capacity
SF - Motor Super Fast with 600 kg capacity
N.B.: this parameter is DISPLAY only.
TC - Setting of automatic closing time. [s]
It is set with different intervals of sensitivity.
• from 0” to 59” with intervals of 1 second;
• from 1’ to 2’ with intervals of 10 seconds.
1’00”
RP - Adjustment of partial opening measurement.
[%]
Adjusts the percentage of operation in relation to the
total opening of the automation.
10 - Minimum
99 - Maximum
30
TP - Setting of automatic closing time after partial
opening. [s]
It is set with different intervals of sensitivity.
• from 0” to 59” with intervals of 1 second;
• from 1’ to 2’ with intervals of 10 seconds.
00’30’’
VA - Setting of opening speed. [cm/s]
N.B.:
24 - Maximum with →
25 - Maximum with → or
40 - Maximum with →
15
Neos Super Fast
25
BA - Basic adjustment