40
IP1529EN
Operating instructions
General safety precautions
for the user
ATTENTION! Important safety instructions
• Please follow these instructions carefully
• Failure to observe the information given
in this manual may lead to severe personal
injury or damage to the equipment • Keep
these instructions for future reference.
WARNING! Disconnect power supply before
any cleaning or maintenance operation • This manual and those for
any accessories can be downloaded from www.ditecautomations.com
These precautions are an integral and essential part of the product and
must be supplied to the user. Read them carefully since they contain
important information on safe installation, use and maintenance. These
instructions must be kept and forwarded to all possible future users of
the system • This product must be used only for the specific purpose for
which it was designed. Any other use is to be considered improper and
therefore dangerous. The manufacturer cannot be held responsible for
any damage caused by improper, incorrect or unreasonable use • Avoid
operating in the proximity of the hinges or moving mechanical parts. Do
not enter within the operating range of the motorized door or gate while
it is moving. Do not obstruct the motion of the motorized door or gate,
as this may cause a dangerous situation • Lock and release the door
or gate wings only when the motor is switched off. Do not enter within
the action range of the door or gate wing(s) • In case of operation in
“hold-to-run” (“dead man”) mode, the corresponding command devices
must be located so to have direct and complete view of the door or gate
during the maneuvers, away from any
moving parts, at a minimum height of
1.5 m, and out of reach of the public
• The motorized door or gate may
be used by children over the age of 8
and by people with reduced physical,
DETACH AND DELIVER TO THE CUSTOMER
To Next Page
Loading...
