Need help?Do you have a question about the dixell iCHiLL 100CX and is the answer not in the manual?
Essential safety precautions for instrument operation and installation.
Details on how to obtain the complete user manual.
Explanation of the controller's display segments and their meanings.
Meaning and function of various icons displayed on the controller.
Description of the functions assigned to each button on the controller.
Describes how to use combinations of keys for specific operations.
Explains the functions of buttons on the remote keyboard unit.
How alarms are displayed on the controller, including icon indications.
Procedure for downloading programmed settings from a Hot Key.
Procedure for uploading settings from the controller to a Hot Key.
Accessing and navigating the user-level parameter settings.
Accessing and navigating the factory-level parameter settings via password.
Method to transfer parameters from the factory level to the user level.
Steps to modify parameter values within the programming levels.
How to enter the main menu to access various functions.
How to leave the menu interface and return to normal operation.
How to view a list of past alarm events recorded by the controller.
Procedure for resetting individual alarm events.
Viewing operational hours for compressors and pumps.
Procedure for resetting the recorded working hours.
How to check the delay time set between defrost cycles.
How to view the detailed alarm log history.
Procedure for resetting the entire alarm log.
How to display the current set point values for chiller or heat pump.
Steps to modify the set point values for chiller or heat pump.
How to view the actual operating set point under various conditions.
Instructions for panel mounting the controller in a 32x74mm cut-out.
Details on mounting the remote keyboard unit on a panel.
Wiring diagram for the model with 5 relays and 1 modulating output.
Wiring diagram for the model with triac and ratiometric pressure transducer.
Wiring diagram for the model with 5 relays and a pressure transducer.
Wiring diagram for the model with 5 relays and a ratiometric pressure transducer.
Parameters related to temperature set points, differentials, and regulation bands.
Parameters specific to units operating without a water storage tank.
Parameters related to geothermal chiller operation.
Parameters for configuring unit model, inputs, outputs, and basic settings.
Parameters for setting and adjusting dynamic set points.
Parameters related to energy saving modes and scheduling.
Parameters controlling compressor operation, timing, and protection.
Parameters for unloading the evaporator based on temperature.
Parameters for unloading the condenser based on pressure.
Parameters for controlling the condenser water pump operation.
Parameters for managing compressors operating in tandem.
Parameters for controlling the modulating evaporator water pump.
Parameters for managing the condenser fan speed and operation.
Parameters related to the hot start function for system components.
Parameters for anti-freeze protection and heater control.
Parameters related to boiler operation and heating control.
Parameters for anti-freeze alarms specifically in heat pump mode.
Parameters for water pump and ambient probe related to evaporator/condenser.
Parameters governing the operation of the condenser water pump.
Parameters controlling defrost cycles, timing, and activation.
Parameters related to alarm thresholds, delays, and event handling.
Essential safety precautions for instrument operation and installation.
Details on how to obtain the complete user manual.
Explanation of the controller's display segments and their meanings.
Meaning and function of various icons displayed on the controller.
Description of the functions assigned to each button on the controller.
Describes how to use combinations of keys for specific operations.
Explains the functions of buttons on the remote keyboard unit.
How alarms are displayed on the controller, including icon indications.
Procedure for downloading programmed settings from a Hot Key.
Procedure for uploading settings from the controller to a Hot Key.
Accessing and navigating the user-level parameter settings.
Accessing and navigating the factory-level parameter settings via password.
Method to transfer parameters from the factory level to the user level.
Steps to modify parameter values within the programming levels.
How to enter the main menu to access various functions.
How to leave the menu interface and return to normal operation.
How to view a list of past alarm events recorded by the controller.
Procedure for resetting individual alarm events.
Viewing operational hours for compressors and pumps.
Procedure for resetting the recorded working hours.
How to check the delay time set between defrost cycles.
How to view the detailed alarm log history.
Procedure for resetting the entire alarm log.
How to display the current set point values for chiller or heat pump.
Steps to modify the set point values for chiller or heat pump.
How to view the actual operating set point under various conditions.
Instructions for panel mounting the controller in a 32x74mm cut-out.
Details on mounting the remote keyboard unit on a panel.
Wiring diagram for the model with 5 relays and 1 modulating output.
Wiring diagram for the model with triac and ratiometric pressure transducer.
Wiring diagram for the model with 5 relays and a pressure transducer.
Wiring diagram for the model with 5 relays and a ratiometric pressure transducer.
Parameters related to temperature set points, differentials, and regulation bands.
Parameters specific to units operating without a water storage tank.
Parameters related to geothermal chiller operation.
Parameters for configuring unit model, inputs, outputs, and basic settings.
Parameters for setting and adjusting dynamic set points.
Parameters related to energy saving modes and scheduling.
Parameters controlling compressor operation, timing, and protection.
Parameters for unloading the evaporator based on temperature.
Parameters for unloading the condenser based on pressure.
Parameters for controlling the condenser water pump operation.
Parameters for managing compressors operating in tandem.
Parameters for controlling the modulating evaporator water pump.
Parameters for managing the condenser fan speed and operation.
Parameters related to the hot start function for system components.
Parameters for anti-freeze protection and heater control.
Parameters related to boiler operation and heating control.
Parameters for anti-freeze alarms specifically in heat pump mode.
Parameters for water pump and ambient probe related to evaporator/condenser.
Parameters governing the operation of the condenser water pump.
Parameters controlling defrost cycles, timing, and activation.
Parameters related to alarm thresholds, delays, and event handling.
General| Model | iCHiLL 100CX |
|---|---|
| Series | iCHiLL |
| Output Type | Relay |
| Buzzer | Yes |
| Protection Degree | IP20 |
| Certifications | CE |
| Relative Humidity | 20...85% RH (no condensing) |
To Next Page