Need help?Do you have a question about the dixell ichill IC100C series and is the answer not in the manual?
General| Model | IC100C series |
|---|---|
| Relative Humidity | 20% to 90% non-condensing |
| Accuracy | ±0.5°C |
| Protection Degree | IP20 |
| Outputs | 1 relay output |
| Programming | Via front panel |
| Certifications | CE |
Provides essential safety guidelines and precautions for using the instrument, emphasizing voltage checks and avoiding moisture.
Describes the three parts of the display area: Left Upper Side, Left Lower Side, and Right Side (Icon area).
Lists and explains the various icons displayed by the instrument, such as temperature units, alarm indicators, and function status.
Describes how alarm codes are displayed on the lower side of the screen, alternating with probe values.
Explains the procedure for downloading programmed settings from a Hot Key to the instrument's memory.
Details the process of uploading instrument parameters to a Hot Key for backup or transfer.
Describes how to access and navigate the user-level programming parameters (Pr1).
Explains how to access the factory-level programming parameters (Pr2), typically requiring a password.
Details the steps to access and view logged alarm events through the function menu.
Provides instructions on how to reset specific alarm events using the function menu.
Details the procedure for modifying the setpoint values using the keyboard controls.
Explains configuration parameters (CF01-CF38) that define unit type, inputs, outputs, and operational modes.
To Next Page