39.42 KEYABOARD ALARM 77
40 AUTOMATIC TO MANUAL ALARM PROCEDURE 77
41 TABLE OF THE OUTPUT STATUS IN ALARM CONDITION 78
41.1 ALARM: “A” TYPE AND STATUS OF THE LOADS IN CASE OF ALARM 78
41.2 ALARM: “B” TYPE AND STATUS OF THE LOADS IN CASE OF ALARM 79
41.3 ALARM: “C” TYPE AND STATUS OF THE LOADS IN CASE OF ALARM 79
42 TABLE OF THE PARAMETERS 81
43 BLACK-OUT 99
44 WIRING CONNECTIONS 99
44.1 HARDWARE RESOURCES FOR IC206CX MODEL 99
44.2 HARDWARE RESOURCES FOR 208CX MODELS 100
44.3 ANALOG INPUTS NTC – PTC PROBES 100
44.4 DIGITAL INPUTS 101
44.5 ANALOG INPUT FOR PRESSURE TRANSDUCER PP30 (4 ÷ 20MA SIGNAL) 101
44.6 ANALOG INPUT FOR PRESSURE RATIOMETRIC TRANSDUCER PPR30 (0 ÷ 5V SIGNAL) 102
45 PWM OUTPUT FOR CONDENSING FAN SPEED CONTROL 103
45.1 PROPORTIONAL OUTPUT FOR FAN CONDENSING CONTROL OR FOR COMPRESSOR INVERTER
CONTROLLED OR FOR AUXILIARY OUTPUTS 103
45.2 PROPORTIONAL OUTPUTS CONFIGURED FOR AUX RELAY CONTROL 104
45.3 HOT KEY 64 CONNECTION 104
45.4 XJ485CX CONNECTION 105
45.5 REMOTE KEYBOARD VI620CX 106
46 INSTALLING AND MOUNTING 106
46.1 PANEL CUT- OUT 106
46.2 VERTICAL BOARDS VI620CX PANEL CUT-OUT 107
47 ELECTRICAL CONNECTIONS 108
48 ACCESSORIES 108
48.1 MONOPHASE FAN CONTROL: 230VAC AND CUT PHASE CONTROL 108
48.2 WIRING KIT 109
48.3 TRANSFORMER 109
48.4 XJ485CX 109
48.5 RT314 KIT 109
48.6 HOT KEY: 109
49 TECHNICAL DATA 110
To Next Page
Loading...
Need help?
General
