EasyManuals Logo

dji mavic User Manual

dji mavic
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
Aircraft
©
2016 DJI. All Rights Reserved.
13
Mavic Pro
User Manual
Return-to-Home (RTH)
The Return-to-Home (RTH) function brings the aircraft back to the last recorded Home Point. There are
three types of RTH procedures: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes
these three scenarios in detail.
GPS
Description
Home Point
If a strong GPS signal was acquired before takeoff, the Home Point
is the location from which the aircraft was launched. The GPS signal
strength is indicated by the GPS icon ( ). The aircraft status
indicator will blink rapidly when the home point is recorded.
Failsafe RTH
If the Home Point was successfully recorded and the compass is functioning normally, Failsafe RTH will
be automatically activated if the remote controller signal is lost for more than three seconds. The Return-
to-Home process may be interrupted and the operator may regain control of the aircraft if the remote
controller signal connection is re-established.
Failsafe Illustration
Height over HP<=10m
5
RTH (adjustable altitude)
Fast Blinking Yellow
1 Record Home Point
Blinking Green
3 Remote Controller Signal Lost
Fast Blinking Yellow
2 Conrming Home Point
Blinking Green
6 Landing (after hovering for 5 secs)
Fast Blinking Yellow
4
Signal Lost Lasts (after 2 mins.)
Fast Blinking Yellow
Height over HP>10m
Elevate to 10m
10m
>2 mins
×
×
×
×
Aircraft cannot return to the Home Point when GPS signal is weak ( [ ] displays grey) or
unavailable.
The aircraft cannot avoid obstruction during the Failsafe RTH when Forward Vision System is
disabled, therefore, it is important to set an suitable Failsafe altitude before each ight. Launch
the DJI GO app and enter “Camera” and select “MODE > Advanced Settings > Failsafe mode”
to set the Failsafe altitude.
User cannot control the aircraft while the aircraft is ascending to its failsafe altitude. However,
user can press RTH button once to exit ascending and regain control.
Aircraft can sense and avoid obstacles when Forward Vision System is enabled and the lighting
conditions is sufcient. The aircraft will automatically climb up to avoid obstacle and y to the
Home Point at the new altitude.

Other manuals for dji mavic

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji mavic and is the answer not in the manual?

dji mavic Specifications

General IconGeneral
Branddji
Modelmavic
CategoryDrones
LanguageEnglish

Related product manuals