To Next Page

To Previous Page

Aircraft

Mavic Pro

User Manual

09:29

61%

P-GPS

H 10.0M D 30M V 11.0M/S

STOP

SAFE TO FLY (GPS)

Note that the aircraft will also automatically adjust its speed when it senses there is obstacle at the front

of the aircraft or it is ying too close to the ground. However, the user should not rely on this feature to

navigate the aircraft between the obstacles. Meanwhile the FailSafe procedure will override the TapFly

operation, given that if the GPS signal is weak; the aircraft will exit the autonomous ight from TapFly and

y back to the Home Point automatically.

Exit TapFly

Use the following methods to exit TapFly:

1. Press once on the Intelligent Flight Pause button on the remote controller or pull back the pitch stick on

the remote controller.

2. Tap “STOP” button on the screen.

STOP

Aircraft will stop and hover after exit from TapFly. You may either tap a new target direction to proceed to

the next ight or bring back the aircraft to the Home Point manually.

ActiveTrack

ActiveTrack allows you to mark and track a moving object on your mobile device screen. The aircraft will

automatically avoid obstacles in its ight path. No external tracking device is required during the whole

tracking process.

Using ActiveTrack

Ensure the Intelligent Flight Battery has more than 50% power and the aircraft is in either P-mode. Then

follow the steps below to use ActiveTrack:

1. Take off and hover at least 9 feet (3 meters) above the ground.

OR OR

Intelligent Flight Pause button

3 meters

SPORT

dji mavic User Manual

Other manuals for dji mavic