Aircraft
22
©
2016 DJI. All Rights Reserved.
Mavic Pro
User Manual
01
Point the aircraft toward the screen
02
Align the boxes
03
Pan and tilt the aircraft
Calibrating Front Sensors
Forward and Downward Vision Systems cameras that installed on landing gear are calibrated on delivery.
However these camera are vulnerable to excessive impact, hence it will require calibration via DJI Assis-
tant 2 or DJI GO app from time to time. Follow the steps below to calibrate the camera when the DJI GO
app prompt you to do so.
Detection Range
The detection range of the Forward and Downward Vision System is depicted as follow. Note that the
aircraft cannot sense and avoid the obstacles that are not within the detection range.
Using Downward Vision System
Downward Vision System
is activated automatically when the aircraft is turned on. No further action
is required. Downward Vision System is typically used in indoor environments, where GPS is
unavailable. Using the sensors that are built into the Downward Vision System, the aircraft can
hover precisely even without GPS.
To Next Page
Loading...
Need help?
General