Aircraft
©
2016 DJI. All Rights Reserved.
23
Mavic Pro
User Manual
Follow the steps below to use Downward Vision System:
1. Toggle the ight mode switch to P-mode.
2. Place the aircraft on a at surface. Note that the Downward Vision System cannot work
properly on surfaces without clear pattern variations.
3. Turn on the aircraft. The aircraft status indicator will ash green two times, which
indicates the Downward Vision System is ready. Gently push the left stick up to lift
off and the aircraft will hover in place.
The performance of your Forward and Downward Vision System are affected by the surface over
which it is ying. The ultrasonic sensors may not be able to accurately measure distances when
operating above sound-absorbing materials. In addition, the camera may not function correctly in
suboptimal environments. The aircraft will switch from P-mode to Atti mode automatically if neither
GPS nor Forward and Downward Vision System are available. Operate the aircraft with great
caution in the following situations:
Flying over monochrome surfaces (e.g. pure black, pure white, pure red, pure green).
Flying over a highly reective surfaces.
Flying at high speeds(over 10 m/s at 2 meters or over 5 m/s at 1 meter).
Flying over water or transparent surfaces.
Flying over moving surfaces or objects.
Flying in an area where the lighting changes frequently or drastically.
Flying over extremely dark (lux < 10) or bright (lux > 100,000) surfaces.
Flying over surfaces that can absorb sound waves (e.g. thick carpet).
Flying over surfaces without clear patterns or texture.
Flying over surfaces with identical repeating patterns or textures (e.g. tiles with the same design).
Flying over inclined surfaces that will deect sound waves away from the aircraft.
Assisted Brakingfrom Forward Vision System
Powered by the Forward Vision System, the aircraft will now be able to actively initiate breaks when obstacles
are detected direct ahead of the aircraft. Note that Forward and Downward Vision System works best when
light condition is ideal and the obstacle does not have feature-less pattern. In addition, the aircraft speed
cannot exceed over 10 meter/second so that the aircraft can break and stop at the safe distance.