dji Mini 2 User Manual

14
©
2021 DJI All Rights Reserved.
DJI Mini 2 User Manual
Return to Home
The Return to Home (RTH) function brings the aircraft back to the last recorded Home Point and lands
when the GPS is signal is strong. There are three types of RTH: Smart RTH, Low Battery RTH, and
Failsafe RTH. If the aircraft successfully recorded the home point and the GPS signal is strong, the RTH
will be triggered when either the user starts Smart RTH, the aircraft battery level is low, or the signal
between the remote controller and the aircraft is lost. RTH will also be triggered in other abnormal
scenarios such as if there is a loss of video transmission.
GPS
Description
Home Point
10
The default Home Point is the first location where the aircraft received a
strong or moderately strong GPS signal (where the icon shows white). The
aircraft status indicator blinks green quickly after the Home Point has been
recorded.
Smart RTH
If the GPS signal is sucient, Smart RTH can be used to bring the aircraft back to the Home Point. Smart
RTH is initiated either by tapping in DJI Fly or by pressing and holding the RTH button on the remote
controller. Exit Smart RTH by tapping in DJI Fly or by pressing the RTH button on the remote controller.
Low Battery RTH
When the Intelligent Flight Battery level is too low and there is not enough power to return home, land
the aircraft as soon as possible. Otherwise, the aircraft will fall when it runs out of power, resulting in the
aircraft being damaged and other potential hazards.
To avoid unnecessary danger due to insucient power, DJI Mini 2 will intelligently determine whether
the current battery level is sucient to return home based on the current location. Low Battery RTH is
triggered when the Intelligent Flight Battery is depleted to the point that the safe return of the aircraft
may be aected.
The maximum download rate can only be achieved in countries and regions where the 5.8 GHz frequency
is permitted by laws and regulations, when using devices that support 5.8 GHz frequency band and Wi-
Fi connection, and in an environment without interference or obstruction. If 5.8 GHz is not allowed by local
regulations (such as in Japan), the mobile device of the user will not support the 5.8 GHz frequency band or
the environment will have severe interference. Under these circumstances, QuickTransfer will automatically
switch to the 2.4 GHz frequency band and its maximum download rate will reduce to 6 MB/s.
Make sure that Bluetooth, Wi-Fi, and location services are enabled on the mobile device before using
QuickTransfer.
When using QuickTransfer, it is not necessary to enter the Wi-Fi password on the settings page of the
mobile device in order to connect. After switching the aircraft to QuickTransfer, launch DJI Fly and a
prompt will appear to connect the aircraft.
The aircraft will automatically enter ight mode by default after restarting. QuickTransfer must be
entered manually again if required.
Use QuickTransfer in an unobstructed environment with no interference and stay away from sources
of interference such as wireless routers, Bluetooth speakers, or headphones.

dji Mini 2 Specifications

General

Type	Quadcopter
Foldable	Yes
Product color	Black, White
Construction type	Ready-to-fly (RTF)
Maximum speed	5 m/s
Frequency band	2.4 - 5.8 GHz
Number of axis	3
Number of rotors	4 rotors
Maximum tilt angle	35 °
Maximum flight time	31 min
Maximum descent speed	3.5 m/s
Maximum flight altitude	6000 m
Maximum weight capacity	- kg
Maximum wind resistance	10.5 m/s
Horizontal hover accuracy	0.1 m
Maximum operating distance	10000 m
Number of propeller blades	2
Maximum pitch angular velocity	130 °/sec
Megapixel	12 MP
Sensor type	CMOS
Video resolutions	1920 x 1080, 2720 x 1530, 3840 x 2160 pixels
Maximum frame rate	60 fps
Optical sensor size	1/2.3 \
Camera shutter speed	4-1 / 8000 s
Supported video modes	1080p, 1520p, 2160p
Image formats supported	JPEG, RAW
Video formats supported	AVC, H.264, MP4, MPEG4, RAW
Maximum image resolution	4000 x 3000 pixels
Maximum video resolution	3840 x 2160 pixels
Field of view (FOV) angle	83 °
Bitrate at maximum video resolution	100 Mbit/s
Built-in processor	-
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	256 GB
Moving control functions	Backward, Downward, Forward, Turn left, Turn right, Upward
Maximum device width	92 mm
Battery voltage	7.7 V
Battery capacity	2250 mAh
Transmitter battery capacity	5200 mAh
AC adapter power	18 W
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	0.5 A
Power consumption (transmitter) (max)	1200 mA
Operating temperature (T-T)	10 - 40 °C
Package type	Box
Cables included	USB Type-C

Weight and Dimensions

Depth	290 mm
Width	245 mm
Height	55 mm
Weight	249 g
Battery weight	86.2 g
Wheelbase diagonal	213 mm