EasyManuals Logo

dji Mini 2 User Manual

dji Mini 2
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
32
©
2021 DJI All Rights Reserved.
DJI Mini 2 User Manual
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the antennas are
positioned in relation to the aircraft as depicted below.
Linking the Remote Controller
The remote controller is linked to the aircraft before delivery. Linking is only required when using a new
remote controller for the rst time. Follow these steps to link a new remote controller:
1. Power on the remote controller and the aircraft.
2. Launch DJI Fly.
3. In camera view, tap and select Control and Pair to Aircraft (Link). The remote controller will beep
continually.
4. Press and hold the power button of the aircraft for more than four seconds. The aircraft beeps once
to indicate it is ready to link. The aircraft beeps twice to indicate linking is successful. The battery
level LEDs of the remote controller will glow solid.
Make sure the remote controller is within 0.5 m of the aircraft during linking.
The remote controller will automatically unlink from an aircraft if a new remote controller is linked to
the same aircraft.
Turn o Bluetooth and Wi-Fi when using OcuSync 2.0 video transmission connection. Otherwise,
they may aect the video transmission.
Fully charge the remote controller before each ight. The remote controller sounds an alert when the
battery level is low.
If the remote controller is powered on and not in use for ve minutes, an alert will sound. After six
minutes, the aircraft automatically powers o. Move the control sticks or press any button to cancel
the alert.
Adjust the mobile device holder to make sure the mobile device is secure.
Fully charge the battery at least once every three months to maintain battery health.
Strong
Weak
Weak
Optimal Transmission Zone

Other manuals for dji Mini 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji Mini 2 and is the answer not in the manual?

dji Mini 2 Specifications

General IconGeneral
TypeQuadcopter
FoldableYes
Product colorBlack, White
Construction typeReady-to-fly (RTF)
Maximum speed5 m/s
Frequency band2.4 - 5.8 GHz
Number of axis3
Number of rotors4 rotors
Maximum tilt angle35 °
Maximum flight time31 min
Maximum descent speed3.5 m/s
Maximum flight altitude6000 m
Maximum weight capacity- kg
Maximum wind resistance10.5 m/s
Horizontal hover accuracy0.1 m
Maximum operating distance10000 m
Number of propeller blades2
Maximum pitch angular velocity130 °/sec
Megapixel12 MP
Sensor typeCMOS
Video resolutions1920 x 1080, 2720 x 1530, 3840 x 2160 pixels
Maximum frame rate60 fps
Optical sensor size1/2.3 \
Camera shutter speed4-1 / 8000 s
Supported video modes1080p, 1520p, 2160p
Image formats supportedJPEG, RAW
Video formats supportedAVC, H.264, MP4, MPEG4, RAW
Maximum image resolution4000 x 3000 pixels
Maximum video resolution3840 x 2160 pixels
Field of view (FOV) angle83 °
Bitrate at maximum video resolution100 Mbit/s
Built-in processor-
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size256 GB
Moving control functionsBackward, Downward, Forward, Turn left, Turn right, Upward
Maximum device width92 mm
Battery voltage7.7 V
Battery capacity2250 mAh
Transmitter battery capacity5200 mAh
AC adapter power18 W
AC adapter frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current0.5 A
Power consumption (transmitter) (max)1200 mA
Operating temperature (T-T)10 - 40 °C
Package typeBox
Cables includedUSB Type-C
Weight and Dimensions IconWeight and Dimensions
Depth290 mm
Width245 mm
Height55 mm
Weight249 g
Battery weight86.2 g
Wheelbase diagonal213 mm

Related product manuals