EasyManuals Logo

dji Mini 2 User Manual

dji Mini 2
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
©
2021 DJI All Rights Reserved.
21
DJI Mini 2 User Manual
Make sure all propellers are in good condition before each ight. DO NOT use aged, chipped, or
broken propellers.
Stay away from the rotating propellers and motors to avoid injuries.
Place the aircraft correctly when storing. It is recommended to use a propeller holder to fix the
propellers. DO NOT squeeze or bend the propellers during transportation or storage.
Make sure the motors are mounted securely and rotating smoothly. Land the aircraft immediately if a
motor is stuck and unable to rotate freely.
DO NOT attempt to modify the structure of the motors.
DO NOT touch or let your hands or body come in contact with the motors after ight as they may be
hot.
DO NOT block any of the ventilation holes on the motors or the body of the aircraft.
Make sure the ESCs sound normal when powered on.
Intelligent Flight Battery
The DJI Mini 2 Intelligent Flight Battery is a 7.7 V, 2250 mAh battery with smart charging and discharging
functionality.
Battery Features
1. Balanced Charging: during charging, the voltages of the battery cells are automatically balanced.
2. Auto-Discharging Function: to prevent swelling, the battery automatically discharges to approx. 96%
of the battery level when it is idle for one day, and automatically discharges to approx. 72% of the
battery level when it is idle for ve days. It is normal to feel moderate heat being emitted from the
battery during the discharging process.
3. Overcharge Protection: the battery stops charging automatically once fully charged.
4. Temperature Detection: To prevent damage, the battery only charges when the temperature is
between 5° and 40° C (41° and 104° F). Charging stops automatically if the temperature of the
battery exceeds 50° C (122° F) during the charging process.
5. Overcurrent Protection: the battery stops charging if an excess current is detected.
6. Over-discharge Protection: discharging stops automatically to prevent excess discharge when the
battery is not in ight use. Over-discharge protection is not enabled when the battery is in ight use.
7. Short Circuit Protection: the power supply is automatically cut if a short circuit is detected.
8. Battery Cell Damage Protection: DJI Fly displays a warning prompt when a damaged battery cell is
detected.
9. Hibernation Mode: if the battery cell voltage is lower than 3.0 V or the battery level is less than 10%,
the battery enters Hibernation mode to prevent over-discharge. Charge the battery to wake it from
hibernation.
10. Communication: information about the voltage, capacity, and current of the battery is transmitted to
the aircraft.

Other manuals for dji Mini 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji Mini 2 and is the answer not in the manual?

dji Mini 2 Specifications

General IconGeneral
TypeQuadcopter
FoldableYes
Product colorBlack, White
Construction typeReady-to-fly (RTF)
Maximum speed5 m/s
Frequency band2.4 - 5.8 GHz
Number of axis3
Number of rotors4 rotors
Maximum tilt angle35 °
Maximum flight time31 min
Maximum descent speed3.5 m/s
Maximum flight altitude6000 m
Maximum weight capacity- kg
Maximum wind resistance10.5 m/s
Horizontal hover accuracy0.1 m
Maximum operating distance10000 m
Number of propeller blades2
Maximum pitch angular velocity130 °/sec
Megapixel12 MP
Sensor typeCMOS
Video resolutions1920 x 1080, 2720 x 1530, 3840 x 2160 pixels
Maximum frame rate60 fps
Optical sensor size1/2.3 \
Camera shutter speed4-1 / 8000 s
Supported video modes1080p, 1520p, 2160p
Image formats supportedJPEG, RAW
Video formats supportedAVC, H.264, MP4, MPEG4, RAW
Maximum image resolution4000 x 3000 pixels
Maximum video resolution3840 x 2160 pixels
Field of view (FOV) angle83 °
Bitrate at maximum video resolution100 Mbit/s
Built-in processor-
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size256 GB
Moving control functionsBackward, Downward, Forward, Turn left, Turn right, Upward
Maximum device width92 mm
Battery voltage7.7 V
Battery capacity2250 mAh
Transmitter battery capacity5200 mAh
AC adapter power18 W
AC adapter frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current0.5 A
Power consumption (transmitter) (max)1200 mA
Operating temperature (T-T)10 - 40 °C
Package typeBox
Cables includedUSB Type-C
Weight and Dimensions IconWeight and Dimensions
Depth290 mm
Width245 mm
Height55 mm
Weight249 g
Battery weight86.2 g
Wheelbase diagonal213 mm

Related product manuals