52
©
2022 DJI All Rights Reserved.
Flight
After completing the pre-flight preparation, it is recommended to train your flying skills and
practice flying safely. Make sure that all flights are carried out in an open area. Strictly abide by
local laws and regulations when flying. Read the Safety Guidelines before flight to ensure the
safe use of the product.
Flight Environment Requirements
1. Do not operate the aircraft in severe weather conditions including wind speeds exceeding
10.7 m/s, snow, rain, and fog.
2. Only fly in open areas. Tall buildings and large metal structures may affect the accuracy of
the onboard compass and GNSS system. It is recommended to keep the aircraft at least 10
m away from structures.
3. Avoid obstacles, crowds, high-voltage power lines, trees, and bodies of water (recommended
height is at least 3 m above water).
4. Minimize interference by avoiding areas with high levels of electromagnetism such as
locations near power lines, base stations, electrical substations, and broadcasting towers.
5. The performance of the aircraft and its battery is limited when flying at high altitudes. Fly
with caution. The maximum service ceiling above sea level of the aircraft is 4,000 m (13,123
ft) when flying with the Intelligent Flight Battery. If the Intelligent Flight Battery Plus is used,
the maximum service ceiling above sea level drops to 3,000 m (9,843 ft). If a propeller guard
is installed on the aircraft with the Intelligent Flight Battery, the maximum service ceiling
above sea level becomes 1,500 m (4,921 ft).
6. GNSS cannot be used on the aircraft in the polar regions. Use the Vision System instead.
7. DO NOT take off from moving objects such as cars and ships.
8. DO NOT use the aircraft in an environment at risk of a fire or explosion.
Flight Limits
GEO (Geospatial Environment Online) System
DJI’s Geospatial Environment Online (GEO) System is a global information system that provides
real-time information on flight safety and restriction updates and prevents UAVs from flying
in restricted airspace. Under exceptional circumstances, restricted areas can be unlocked to
allow flights in. Prior to that, the user must submit an unlocking request based on the current
restriction level in the intended flight area. The GEO system may not fully comply with local laws
and regulations. Users shall be responsible for their own flight safety and must consult with the
local authorities on the relevant legal and regulatory requirements before requesting to unlock
a flight in a restricted area. For more information about the GEO system, visit https://www.dji.
com/flysafe.
Flight Limits
For safety reasons, flight limits are enabled by default to help users operate this aircraft safely.
Users can set flight limits on height and distance. Altitude limits, distance limits, and GEO zones
function concurrently to manage flight safety when GNSS is available. Only altitude can be
limited when GNSS is unavailable.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
