dji Osmo Action 5 Pro - Setting the Shooting Parameters

4 Using the Product
4.1 Setting the Shooting Parameters
Swipe up from the bottom of the screen to set the parameters for each shooting mode.
Various parameters can be set in dierent shooting modes.
Burst
Set the aspect ratio and burst rate (frames per second).
When the burst rate is set to O, the camera only takes one photo.
With dierent aspect ratios selected, dierent burst rates (frames per second) can be set.
At this time, the camera will quickly take multiple photos in succession, allowing users
to select the best shot from a series of photos. This is ideal for capturing fast-moving
subjects.
Pre-Rec and Loop Recording
In the video and SuperNight mode, tap the upper left corner to enable Pre-Rec or Loop
Recording and set the time duration.
• Pre-Rec: When enabled, the camera will pre-record footage within the set time
duration. Once the Shutter/Record button is pressed, the camera will save the latest
pre-recorded footage before pressing the Shutter/Record button and keep recording,
then save the footage as a whole video. This function allows the camera to save the
footage before pressing the Shutter/Record button to avoid taking up too much space
on the microSD card, helping capture highlights (especially for shing).
• Loop Recording: When enabled, the camera records a video by overwriting older
footage with new footage at selected time intervals. This function allows the camera
to save space on the microSD card, and is suitable for use in scenes where the user is
waiting to capture unanticipated highlights (such as driving).
EIS Mode
In the video and SuperNight mode, tap on the upper right corner to set the EIS mode.
• Disabled: When selected, record the video with the largest FOV.
• RockSteady: Stabilizes footage while retaining the dynamics of movement, which is
suitable for rst-person perspective shooting.
• RockSteady+: Compared with RockSteady, the edges of these images will be reduced
slightly to obtain a stronger stabilization performance.
• HorizonBalancing: This mode reduces the shaking of images within ±45°.
• HorizonSteady: This mode corrects shakes for any horizontal rotation (360°) and locks
on the leveled horizon in every frame, regardless of how the camera is mounted or
worn.
Osmo Action 5 Pro User Manual
20 © 2024 DJI All Rights Reserved.