dji Osmo Action 5 Pro - Voice Control; Timecode; Highlight

Tap to create and manage custom modes. Custom modes can then be used directly to
shoot similar scenes.
2. Quick Switch
Tap the icon to set Voice Prompt and set the modes accessible with the Quick Switch
button. When Voice Prompt is enabled, the camera will broadcast the shooting mode
when changing modes by pressing the the Quick Switch button.When the camera is
installed on a helmet or other hard-to-see locations, users can accurately select the
required mode with Voice Prompt.
3. Brightness
4. Settings
5. Orientation Lock
6. Screen Lock
7. Voice Control
8. Full Front Screen
4.4 Voice Control
Swipe down from the top of the screen to enter the control menu, tap , and select
Voice Control. Enable Voice Control to control the camera with voice commands.
Simplied Chinese and English are supported. Voice commands in English include Start
Recording, Stop Recording, Take Photo, and Shut Down.
4.5 Timecode
Swipe down from the top of the screen to enter the control menu, tap
, and select
Timecode to set the timecode for the camera.
Either reset the timecode or sync with the system time. The camera time code can be
synchronized with a time code synchronizer using the USB-C port.
Tap Timecode Display to display the time code in the liveview.
4.6 Highlight
Tap the to play back the video. During playback, you can tap the icon to mark
highlights, helping to quickly locate specic moments during post-editing, and reducing
Osmo Action 5 Pro User Manual
22 © 2024 DJI All Rights Reserved.