Enable or disable ECO function. You may
choose the following two options:
ON: ECO mode enable
OFF (default): ECO mode disable
This setting is mainly used for some special
units. Users are not advised to operate it.
After starting EP mode, output voltage
display will have nine option (240V, 230V,
220V, 208V, 100V, 110V, 115V, 120V,
127V) but the voltage output is still four
option (240V, 230V, 220V, 208V). You can
choose to shield the LCD display capacity
values whens starting up, you can choose
whether UPS go directly to the Line mode or
bypass mode when connect mains and
automatically start up.
EP setting ON required.
AUO setting only can be set in Stdby mode
or Bypass mode. You may choose the
following two options:
ON: UPS will start up automatically and
works in Line mode when connect mains.
OFF(Default): UPS won’t start up
automatically when connect mains except
EOD, it will work in standby or bypass mode.
To Next Page
Loading...