7
Items Default settings
LCD digital
Speed control button Speed
Set stirring speed, press the button to start/stop stirring
function.
Mode switch knob Mode
Shift speed and torque display. LCD displays the current
speed value at initial running. LCD displays the current
torque value when press the mode knob.
LCD display LCD displays the real working state and all setting values.
Speed/torque light RPM/Torque
Yellow/Green LED display light. Different color of LED
lights show the value for speed or torque that LCD screen
currently displays. Yellow LED light shows that LCD screen
currently displays speed. Green LED light shows that LCD
screen currently displays torque.
Power switch /Overload protection light
Power/Overload
Green/Red LED display light.
LED light shows green when switch on, LED light shows red
when starts overload protection. When the torque reaches
limited value, overload protection function will be started. At
the same time overload protection light flashes, while the
system stops running.
Drill chuck Can be held stirring impellers.
Push-through agitator shaft If needed, shaft can push-through agitator.
Power switch I/O Switch ON or OFF the instrument.
To Next Page
Loading...
