DLX LUXE - Feathertouch

LUXEPaINTBaLL.COm

866.573.LUXE(5893)
 FIG. 3 
 FIG. 4 
PaGE 13

2.2 INSTaLLING aN aIr SYSTEm
 FIG. 5 
STORAGE
f
EAT
h
ERTOuch
TM
aIr 2.3 FEaTHErTOUCH
YOUR LUXE® IS IS EQUIPPED WITH A FEATHERTOUCH
TM
MANIFOLD allowing for extra-gentle treatment
of the most brittle paintballs and an unbeatably smooth firing cycle. The FeatherTouch
TM
control restricts
the flow of gas leaving the forward portion of the Luxe Power Core
TM
. This provides a cushion of air which
softens the bolt’s forward motion. When using the Luxe
TM
in FeatherTouch
TM
mode, it will be necessary
to clean and grease the bolt more frequently. Additionally, anti-FSDO adjustments may be necessary for
reliable operation. Maintenance is more critical with FeatherTouch
TM
, but top professional players swear by
the unmatched feel and fragile paint handling.
To activate FeatherTouch
TM
the FeatherTouch
TM
control screw is moved from its storage location to the
FeatherTouch
TM
hole in the Luxe
TM
solenoid manifold. De-activating FeatherTouch simply requires removing
the screw from the manifold.
With the Luxe
TM
unloaded and degassed, remove the rubber grip, then use a 1/16-inch allen wrench to
remove the control screw from its storage position [FIG 5.] The control screw has a small black o-ring on
its front. The o-ring may cause the control screw to stick in the threaded hole, requiring a tap on the grip
frame to work it loose. Make sure the o-ring is correctly seated on the control screw when reinstalling.
When not in use, the control screw should be returned to its threaded storage hole for safekeeping.
Dwell Adjustment will typically need to be increased by 2 milliseconds when FeatherTouch
TM
is turned on. A
dwell setting of 14 milliseconds is ideal..