DLX LUXE User Manual

 TREAT EVERY PAINTBALL MARKER AS IF IT WERE LOADED. 
 NEVER LOOK DOWN THE BARREL OF A PAINTBALL MARKER. 
 KEEP THE LUXE® MARKER ON SAFE (POWER OFF) UNTIL READY TO SHOOT. 
 KEEP YOUR FINGER OFF THE TRIGGER UNTIL READY TO SHOOT. 
 NEVER POINT THE LUXE® MARKER AT ANYTHING YOU DON’T WISH TO SHOOT. 
 DO NOT SHOOT FRAGILE OBJECTS SUCH AS WINDOWS. 
 KEEP THE BARREL BLOCKING DEVICE ON THE LUXE® MARKER’S MUZZLE WHEN NOT SHOOTING. 
 ALWAYS REMOVE PAINTBALLS AND DEGAS THE LUXE® MARKER BEFORE DISASSEMBLY. 
 STORE AND TRANSPORT THE LUXE® MARKER UNLOADED AND DEGASSED IN A SECURE PLACE. 
 FOLLOW ALL MANUFACTURER’S WARNINGS AND INSTRUCTIONS FOR PROPELLANT 
SOURCE HANDLING, STORAGE, AND FILLING.

DLX LUXE Specifications

General

Barrel Length	14 inches
Power Source	9V Battery
Material	Aluminum
Type	Electronic
Barrel Thread	Autococker
Feedneck	Clamping
ASA	On/Off
Board	OLED
Firing Modes	ramping
Weight	1 lb 13 oz

Summary

Safety Warnings

General Safety Precautions

Essential safety guidelines for operating the paintball marker.

Orientation

1.1 Quick Start Guide

Step-by-step guide to get the marker operational quickly.

Air System

2.1 Compressed Air System Basics

Information on HPA systems, pressures, and safety requirements.

2.2 Installing Air System Components

Procedures for mounting and connecting compressed air systems.

Hardware and Adjustments

3.1 Adjusting Marker Velocity

Guide to measuring and adjusting the paintball's exit velocity.

3.3 Trigger Adjustment Guide

How to adjust post-travel, pre-travel, activation, and resistance.

3.5 LiPo Battery Information

Details on the LiPo battery, charging, and indicators.

Software and Settings

4.1 Software Programming Interface

Guide to navigating the marker's electronic settings via joystick or buttons.

4.6 Firing Modes Overview

Overview of available firing modes like Semi-Auto, Burst, NXL, etc.

First Shot Drop Compensation

Explains First Shot Drop Off and how to compensate for it.

Maintenance

5.1 Luxe Power Core Maintenance

Steps for disassembling, cleaning, and reassembling the power core.

5.2 Ball Detents and Vision Eyes

Guide to cleaning and inspecting ball detents and the vision system.

Advanced Maintenance

6.2 Vertical Regulator Servicing

Procedures for disassembling and maintaining the vertical regulator.

6.3 Ball Detent Assembly Replacement

Instructions for replacing worn ball detent plungers and springs.

6.6 Troubleshooting Common Issues

Solutions for common problems like leaks, power issues, and velocity drops.

6.7 Limited Warranty Information

Details on product warranty coverage and terms.