DMP Electronics CellCom LTE Series - Activate the Cellular Module; Dealer Admin Activation; Tech APP Activation; Remote Link Activation

Digital Monitoring Products CellCom‑LTE Programming and Installation Guide
14
ACTIVATE THE CELLULAR MODULE
For more information about using Dealer Admin, Tech APP, or Remote Link, refer to DMP.com/dmphelp.
Dealer Admin Activation
1. Find the customer and select their name.
2. The customer’s summary page opens. In the Systems section, press the Add icon.
3. Enter the system name.
4. In System Type, select CellComSL.
5. In Connection Type, select Cellular.
6. In SIM Number, enter the SIM number and press Get Status.
7. Press Activate.
8. In Account Number, enter the system’s receiver number followed by the account number.
9. Select a Rate Plan for the communicator.
10. Enter the panel Remote Key. The remote key must match the one programmed in panel REMOTE OPTIONS.
11. To confirm proper communication, press Test Connection.
12. A dialog pops up to ask if you want to perform the initial connection to the panel. Press Yes .
13. Configure additional options as needed, then press Save.
Tech APP Activation
1. Go to the Customer Summary > Systems.
2. Tap the Add icon.
3. Enter the System Name.
4. In System Type, select CellComSL.
5. In Connection Type, choose Cellular.
6. In Account Number, enter the system’s receiver number followed by the account number.
7. Enter the panel Remote Key. The remote key must match the one programmed in panel REMOTE OPTIONS.
8. Enter the SIM Number and tap Get MEID/SIM Status.
9. Select a Rate Plan for the communicator.
10. Configure additional options as needed, then tap Save.
Remote Link Activation
1. Go to File > Panel Information.
2. Press New.
3. In Model, select CellComSL.
4. If necessary, enter a firmware version number in Version.
5. Enter the receiver number and account number, then press OK.
6. In Connection Information, select Cellular.
7. Enter the panel Remote Key.
8. Enter the cellular Phone Number.
9. Press OK.
10. Go to Program > Communications.
11. In Connection, press Activate.
12. Select SIM as the SIM Type.
13. Enter the SIM number, then select a Rate Plan.
14. Press Activate.