DMP Electronics eBox-3300 - Taking Care of Your eBox-3300

eBox-3300
11
USING CABLES FOR CONNECTION
To avoid problem, use only the specified interface cables in your
accessory bag. The supplier will not be responsible for the connection
arising from the other unspecified peripheral equipment.
Do not use cut or damaged cables for connection.
CLEANING YOUR VESA PC
Clean the eBox-3300 with a soft, dry cloth or a soft cloth lightly moistened with a
mild detergent solution.
Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or
benzene, as these may damage the finish of eBox-3300.
When a solid object falls or a liquid spills onto the eBox-3300, turn off the eBox-
3300 immediately and unplug the LAN and power cables. Contact a qualified person
or your dealer to check the eBox-3300 before you use it again.
Always disconnect the power cord from the power source before cleaning the eBox-
3300.